Southwire 65223399, ROYAL GUARD RHH/RHW-2 Power Cable 4 AWG Tinned Copper 600V
Description
Southwire 65223399 is a 4 AWG single-conductor ROYAL GUARD™ power cable with Class B compressed stranded tinned copper, lead free ethylene propylene rubber (EPR) Type RHH/RHW-2 insulation and a lead free, silicone-free thermoset chlorinated polyethylene (CPE-TS) jacket, rated 600V.
Southwire 65223399 Technical Specs
Construction
| Conductor Size | 4 AWG |
|---|---|
| Number of Conductors | 1 |
| Strands | 7 |
| Conductor Material | Class B compressed stranded tinned copper per ASTM B33 and ASTM B8 |
| Binder Tape | Mylar tape |
| Insulation | Lead free ethylene propylene rubber (EPR), Type RHH/RHW-2 |
| Jacket | Lead free and silicone-free cross-linked/thermoset chlorinated polyethylene (CPE-TS) |
Dimensions and Weight
| Diameter Over Conductor | 0.225 in (0.57 cm) |
|---|---|
| Insulation Thickness | 45 mils (1.14 mm) |
| Jacket Thickness | 30 mils (0.76 mm) |
| Approx. Overall Diameter | 0.390 in (0.99 cm) |
| Copper Weight | 128 lbs/1000 ft (190 kg/km) |
| Approx. Total Weight | 176 lbs/1000 ft (262 kg/km) |
Electrical and Thermal Ratings
| Voltage Rating | 600V |
|---|---|
| Conductor Temperature | 90°C normal operation in wet and dry locations; 130°C emergency overload; 250°C short circuit |
| Environmental | Sunlight resistant; oil resistant; silicone free |
Compliance and Standards
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 44: Thermoset-Insulated Wires and Cables
- UL 1685 FT4: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-95-658 (NEMA WC70): Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- IEEE 1202 FT4: Flame Test (70,000) BTU/hr Vertical Tray Test
- VW-1: Vertical-Wire Flame Test
Southwire 65223399 Applications
- Wet and dry areas.
- Conduits, ducts, troughs and cable trays.
- Direct burial.
- Aerial installation supported by a messenger.
- Class I, II and III, Division 2 per NEC Articles 501 and 502.
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.