Southwire 66607515, Building Wire 1/0 AWG Copper SIMpull RWU90 XLPE 1000V Red
Description
Southwire 66607515 is a 1/0 AWG copper SIMpull RWU90 building wire in red, with a Class B compressed stranded bare copper conductor under cross-linked polyethylene (XLPE) insulation, rated 1000 volts. The maximum conductor temperature is 90°C and a minimum recommended installation temperature of minus 40°C, with suitable handling procedures.
Southwire 66607515 Technical Specs
Construction
| Conductor Size | 1/0 AWG |
|---|---|
| Conductor Material | Class B compressed stranded bare copper per ASTM B3 and ASTM B8 |
| Number of Strands | 19 |
| Insulation | Cross-linked polyethylene (XLPE) |
| Type Designation | RWU90 |
| Insulation Colour | Red |
Dimensions and Weight
| Diameter Over Conductor | 0.361 in (0.92 cm) |
|---|---|
| Insulation Thickness | 95 mils (2.41 mm) |
| Approx. Overall Diameter | 0.562 in (1.43 cm) |
| Copper Content Weight | 326 lbs/1000 ft (485 kg/km) |
| Approx. Total Weight | 393 lbs/1000 ft (585 kg/km) |
Ratings
| Voltage | 1000 volts |
|---|---|
| Maximum Conductor Temperature | 90°C |
| Minimum Installation Temperature | Minus 40°C, with suitable handling procedures |
Standards
| ASTM B3 | Soft or Annealed Copper Wire |
|---|---|
| ASTM B8 | Concentric-Lay-Stranded Copper Conductors |
| CSA C22.2 No. 38 | Thermoset-insulated wires and cables |
| CSA AWM | I A/B FT1 |
Southwire 66607515 Applications
- Designed for direct earth burial, with protection as required by the inspecting authority.
- Suitable for service entrance, above or below ground.
- With SIMpull technology on this size, it can be installed in conduit without the aid of lubrication.
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.