Southwire 66899699, Armored Cable 750 KCMIL 1C Copper 15 kV Red
Southwire · MPN 66899699
Description
Southwire 66899699 is a 750 KCMIL single-conductor HVTECK armored cable rated 15 kV at a 133% insulation level. Its 61-strand bare copper conductor carries a semi-conducting conductor shield, 220 mils of tree-retardant cross-linked polyethylene (TRXLPE), a strippable insulation shield and concentric copper bond and shield wires. A PVC inner jacket sits under aluminum interlocked armor (AIA), finished with a red PVC outer jacket.
Southwire 66899699 Technical Specs
Conductors & Insulation
| Conductor Size | 750 KCMIL |
|---|---|
| Number of Conductors | 1 |
| Strand Count | 61 |
| Conductor | Class B compressed stranded bare copper per ASTM B3 and ASTM B8 |
| Insulation | Tree-retardant cross-linked polyethylene (TRXLPE) |
| Insulation Thickness | 220 mils (5.59 mm) |
| Diameter Over Conductor | 0.968 in (2.46 cm) |
| Diameter Over Insulation | 1.464 in (3.72 cm) |
Shielding & Grounding
| Conductor Shield | Semi-conducting cross-linked copolymer |
|---|---|
| Insulation Shield | Strippable semi-conducting cross-linked copolymer |
| Concentric Shield | Concentrically applied copper bond and shield wires, exceeding the minimum requirement of Table 44, CSA Standard C68.10 and Table 16A, Canadian Electrical Code Part 1 |
| Neutral Separator | Mylar tape |
| Diameter Over Shield | 1.524 in (3.87 cm) |
Jacket & Armor
| Inner Jacket | PVC |
|---|---|
| Inner Jacket Thickness | 110 mils (2.79 mm) |
| Armor | Aluminum interlocked armor (AIA) |
| Diameter Over Armor | 2.222 in (5.64 cm) |
| Outer Jacket | Red polyvinyl chloride (PVC) |
| Jacket Thickness | 75 mils (1.91 mm) |
Dimensions & Weight
| Nominal Outside Diameter | 2.342 in (5.95 cm) |
|---|---|
| Approximate Weight | 4,258 lbs/1000 ft (6337 kg/km) |
| Maximum Pull Tension | 6,000 lbs (2721.55 kg) |
| Minimum Bend Radius | 28.1 in (71.37 cm) |
Ratings
| Voltage Rating | 15 kV |
|---|---|
| Insulation Level | 133% |
| Conductor Temperature | 105°C normal operation; 140°C emergency overload; 250°C short circuit |
| Maximum Sidewall Pressure | 1000 lbs/ft |
Standards
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- CSA C22.2 No. 174
- CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
- CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
- CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
- CSA HL rating
- CSA SUN RES - for Sunlight Resistant rating
- ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA T-29-520 Flame Test (210,000 BTU/Hr)
- IEEE 383 Flame Test (70,000 btu)
- IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
- FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
- AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
This 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications, rated FT4, -40°C and HL, with sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids, and flame retardance.
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.