Southwire 68706152, Bare Aluminum Conductor ACSS 477 KCMIL 26/7 HAWK
Description
Southwire 68706152 is an ACSS bare aluminum conductor in 477 KCMIL, codeword HAWK. Its 26 aluminum 1350-O strands, in the fully annealed (soft) temper, are stranded in two or more layers around a steel core of 7 wires. Nominal outside diameter is 857 mils and nominal weight 655 lbs per 1000 ft.
Southwire 68706152 Key Features
- The annealed temper of the aluminum means the steel core carries most or all of the conductor's mechanical load.
- Steel core wires are protected from corrosion by a zinc-5% aluminum-mischmetal alloy coating.
- Corrosion protection should suit the environment the conductor will be exposed to.
- ACSS operates continuously at elevated temperatures up to 250°C without loss of strength.
Southwire 68706152 Technical Specs
Conductor
| Codeword | HAWK |
|---|---|
| Conductor Type | ACSS (Aluminum Conductor, Steel Supported) |
| Southwire Designation | 477-26/7 ACSS/MA2/63% HAWK |
| Conductor Size | 477 KCMIL |
| Stranding (Aluminum/Steel) | 26/7 |
| Aluminum Wire | 1350-O, fully annealed (soft) temper |
| Core Designation | MA2 |
Dimensions and Weight
| Nominal Outside Diameter | 857 mils (21.78 mm) |
|---|---|
| Nominal Total Weight | 655 lbs/1000 ft (975 kg/km) |
Standards
| ASTM B500 | Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B803 | High-Strength Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B856 | Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B958 | Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
Southwire 68706152 Applications
- ACSS is specified for overhead distribution and transmission lines.
- Reconductoring is listed where current must increase while existing tensions and clearances are kept.
- Under electrical loadings it sags less than a comparable ACSR, and its final sags are not affected by long-term creep of the aluminum.
- Prestretched during installation it is self-damping; it also suits new lines where structures can be economized through reduced sag, new lines needing high emergency loadings, and lines where aeolian vibration is a problem.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.