Southwire 69377053, Bare Aluminum Conductor ACSS/TW 1272 KCMIL 39/19 PHEASANT
Description
Southwire 69377053 is a 1272 KCMIL ACSS/TW bare overhead conductor, codeword PHEASANT, Type 13 design: 39 trapezoidal-shaped strands of aluminum 1350 of 63% minimum average conductivity in the fully annealed, soft temper, stranded in layers around a steel core of 19 wires. Nominal outside diameter is 1260 mils and nominal weight 1630 lbs per 1000 ft.
Southwire 69377053 Key Features
- Because the aluminum is in the fully annealed, soft temper, the steel core carries most or all of the conductor's mechanical load.
- Corrosion protection on the steel core wires is Galfan, a zinc-5% aluminum-mischmetal alloy coating.
- The ACSS/TW line runs continuously at up to 250°C without loss of strength.
Southwire 69377053 Technical Specs
Conductor
| Codeword | PHEASANT |
|---|---|
| Conductor Type | ACSS/TW (Aluminum Conductor, Steel Supported, Trapezoidal Shaped Aluminum Strands) |
| Southwire Designation | 1272-39/19 TYPE 13 ACSS/TW/MA2/63% PHEASANT |
| Design | Type 13 |
| Conductor Size | 1272 KCMIL |
| Stranding (Aluminum/Steel) | 39/19 |
| Aluminum Wire | 1350-0, 63% minimum average conductivity, fully annealed (soft) temper, trapezoidal shaped |
| Core Designation | MA2 |
Dimensions and Weight
| Nominal Outside Diameter | 1260 mils (32.00 mm) |
|---|---|
| Nominal Total Weight | 1630 lbs/1000 ft (2426 kg/km) |
Standards
| ASTM B500 | Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced |
| ASTM B803 | High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B857 | Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
Southwire 69377053 Applications
- Overhead distribution and transmission lines.
- Under emergency electrical loadings it sags less than ACSR/TW, and long-term creep of the aluminum does not affect its final sag.
- Self-damping is a property For the construction.
- For new line construction, benefits include reduced tower cost, decreased sag, higher operating temperature and improved corrosion resistance.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.